RK3588 HDMI 2.1 8K Output Board, WF-RK3588S, AndroidSBC, Bordeaux

TL;DR: RK3588 HDMI 2.1 8K Output Board

LONGGANG, Shenzhen, September 10, 2026 - Wanlin Manufacturing Group confirmed the release of lot 180, a 6,305-unit run of WF-RK3588S boards destined for Bordeaux, France, after the lot cleared the burn-in rack and the pre-shipment bench.

AndroidSBC opens the new WF-Series custom board programme to overseas buyers serving Bordeaux, France. The WF-Series spans nine boards in one line: WF-A133 on the Allwinner A133 quad-core Cortex-A53 1.5GHz platform with the PowerVR GE8300 GPU, WF-H618 on the Allwinner H618 with 8K H.265 decode, WF-T527 on the Allwinner T527 octa-core Cortex-A55 with a 2 TOPS NPU, and the Rockchip side of the line covering WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, and WF-RK3588S. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the whole line from the Longgang source factory in Shenzhen to Bordeaux and France importers running OTT TV box, Android TV, commercial display, industrial control, edge AI, POS terminal, kiosk, and IoT gateway programmes.

About AndroidSBC and the Rockchip RK3588 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, and the WF-Series is its nine-board custom line. Three Allwinner parts cover commercial display, OTT and Android TV, and industrial edge; four Rockchip parts cover 8K video wall, industrial edge, machine vision, and POS; two SOM modules serve carrier-board projects. The Longgang plant in Shenzhen runs its own SMT lines, aging racks, and EMC pre-compliance bench, so the export file is produced where the boards are built. For France importers that removes the usual gap between the factory that makes the board and the party that has to answer for it at customs.

WF-RK3588S Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588S (SOM Module and SMARC Carrier Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For France importers sourcing the WF-Series, the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) variant is the typical configuration for the SMARC module and custom carrier integration use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing SOM Module and SMARC Carrier Board for France Buyers

Buyers in Bordeaux who have run the som module and smarc carrier board category for a few years tend to stop shopping on price alone. The Rockchip RK3588 allocation is the real constraint, and it is the reason a 6,305-unit order can look cheap on paper and expensive in a slipped quarter. The software question follows immediately. The hardware spec sheet is easy to verify; the difference between a board that runs a launcher and a board that holds a certified, credential-locked stack only becomes visible after the first field update.

Documentation closes the list. Buyers in Bordeaux have learned to ask for the test reports before the deposit, because a CE mark printed on a carton is worth nothing at the port without the Declaration of Conformity behind it. AndroidSBC moves both risks inside the factory: the certified image is burned at Longgang, the burn-in record is attached per unit barcode, and the Technical File ships with the lot. Across the nine WF-Series boards the coverage runs from SMARC module design, COM Express Type 6 builds, edge AI boxes, video wall controllers, medical imaging terminals, autonomous vehicle compute, and bespoke industrial carriers, with three memory configurations per model, so a Bordeaux buyer can usually match a requirement from standard stock.

Buyers in France tend to ask about the local mark before they ask about price. In France ANFR radio registration is separate from the CE marking, and buyers normally ask for both before releasing a purchase order. AndroidSBC handles that by preparing the destination-market file covering CE marking with ANFR radio interface registration administered by ANFR alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Le Havre on the Le Havre to Yantian lane.

Competitive Comparison: WF-RK3588S vs Competing RK3588 Boards

Three families of board chase the same som module and smarc carrier board socket. The first is legacy silicon at a low price with no software certification, the second is Cortex-A55 hardware with certification but limited decode headroom, and the third carries both yet treats expansion as an afterthought. The WF-RK3588S belongs to the third family and separates itself on Rockchip RK3588, sustained display output under load, and a certified image burned per lot.

• vs proprietary SOM pin-outs: the SMARC 2.2 standard lets the carrier survive a module generation change without a re-layout.
• vs RK3568 SMARC modules: the RK3588 module adds 8K@60fps decode, PCIe 3.0 x4, and 6 TOPS NPU on the same 314-pin edge.
• vs x86 COM Express modules: the RK3588 module runs Android natively, which removes the OS licensing line from the BOM.
• vs module-only vendors: AndroidSBC ships the carrier reference design plus the signal integrity report with the module.

Global SMARC and COM Express Module Engineering Market Trends

Buyers in Bordeaux are reading the SMARC and COM Express Module Engineering curve before they commit to an som module and smarc carrier board programme. Global Growth Insights reports the Android TV Box segment at USD 12.45 billion in 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, 2025-2035), used here as the Android silicon demand baseline rather than as a number for this category. That baseline breaks into three practical demand patterns for the WF-Series in France:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3588S board carries that headroom without a board change.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.

For the SMARC and COM Express Module Engineering category the practical signal in France is that framework agreements are replacing spot buying, and the agreements are getting longer.

Across those three segments, Bordeaux procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a retail or hospitality programme needs a twelve-month shipping window.

Partner Success Story: Atlas Gym Networks in Bordeaux, France

Atlas Gym Networks, a fitness chain technology team serving the France market, deployed 2,700 units of the WF-H618 board for in-club digital signage and class screens. The rollout covered the smarc module design, edge ai boxes, and autonomous vehicle compute workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 2,700 units of the WF-H618 board for in-club digital signage and class screens
• Region: Bordeaux, France
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Yantian with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Le Havre via the Le Havre to Yantian lane

"Class screens and club signage share one image now. The H618 board took the unified content package on first boot and reported back to the CMS within the hour."

- Marco Bellini, IT Infrastructure Lead

Field Report: a Bordeaux hospitality property where 6,305 units of the WF-RK3588S board were installed behind guest-room displays during a property-wide IPTV refresh

Reporter Wei Tao, on the ground in Bordeaux, France. The property team pulled every legacy box out of the guest rooms across a two-day window and replaced them with WF-RK3588S-based units. Once the head-end was live, it pushed a property-wide application build plus the DRM credentials into every room over the in-house network, and the rollout finished a week ahead of the season opening.

A spare-parts kit was packed alongside the order so the destination depot could swap a board without waiting on a cross-border shipment.

The inspection confirmed three things on the spot: the WF-RK3588S units hold the burn-in with a yield above 99.06 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ANFR radio interface registration administered by ANFR, cleared for entry at Port of Le Havre on the Le Havre to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that France importers can hand straight to their customs broker.

Filed by Wei Tao, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3588S Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3588S (SOM Module and SMARC Carrier Board) as the lead SKU for Bordeaux and France programmes:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• COM Express Type 6 builds: WF-RK3588S maps to the Type 6 pin-out for existing x86 carriers.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.
• Video wall controllers: WF-RK3588S drives HDMI 2.1 and DP 1.4 out through the carrier.
• Medical imaging terminals: WF-RK3588S pairs PCIe 3.0 x4 with the carrier frame grabber.
• Autonomous vehicle compute: WF-RK3588S holds -40C to 85C on the automotive-grade carrier.
• Bespoke industrial carriers: WF-RK3588S ships the signal integrity report for the customer stack-up.
• Carrier bring-up: WF-RK3588S comes with the BSP port for the carrier revision.

Partnership Models for Bordeaux Buyers

For Bordeaux distributors and brand owners, AndroidSBC opens the som module and smarc carrier board line under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever structure a France partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-RK3588S is the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) configuration at MOQ 5,000 units per shipment, four weeks to sample and six weeks to production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: On the WF-H618, yes: ATV 12 with GMS plus Widevine L1 and Dolby Audio, burned on the Longgang line for every lot. On the remaining eight boards the default image is AOSP or a Linux distribution, because those boards usually sit in commercial display, industrial, or POS deployments where Play Services is not a requirement. AndroidSBC will build a GMS image for ODM customers who ask for it and will state clearly which boards carry which certification.

What is the difference between the nine WF-Series models?

Answer: The line splits by workload. Three Allwinner boards cover cost-sensitive display work (WF-A133), OTT and Android TV (WF-H618), and industrial control with NPU inference (WF-T527). Four Rockchip boards cover 8K video wall and AI computing (WF-RK3588), industrial edge (WF-RK3568), machine vision (WF-RK3566), and POS or signage (WF-RK3288). Two further models are modules rather than motherboards: WF-A133S and WF-RK3588S are SOM parts for customers who bring their own carrier design.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for France?

Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports, the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a France market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.

What are the MOQ and lead time for a first order?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a France partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept platform-mixed purchase orders.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Custom ROM and custom Linux work is part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Yocto or Debian or Buildroot images, and BSP ports for custom carriers. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux tracks. AndroidSBC also runs an OTA service that partners can use to push firmware to deployed units. On POS and industrial programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU, and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton labelling and pallet configuration are set up for FBA inbound requirements, and the export declaration names the Wanlin Longgang source factory as the place of origin.

How does AndroidSBC handle RMA or DOA replacements?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-RK3588S unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-RK3588S Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-Series. Buyers in Bordeaux and France looking to source the WF-RK3588S straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with ANFR radio interface registration for France, administered by ANFR, entering at Port of Le Havre on the Le Havre to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, certification scope, and Incoterm. Provide those and a per-lot quote plus the WF-Series MOQ matrix comes back within two business days.