Industrial SCADA Interface Board, WF-H618, AndroidSBC, Bordeaux

TL;DR: Industrial SCADA Interface Board

SHENZHEN, China, September 10, 2026 - The WF-H618 board line at Wanlin Longgang closed lot 468 this week. 26,315 units are now booked for Bordeaux, France, shipped FOB with the full certification file attached.

AndroidSBC field deployment report from active Allwinner and Rockchip custom board projects serving Bordeaux, France. The line runs from the Allwinner A133 display board at the entry tier up to the Rockchip RK3588 eight-core board for video wall and AI work, with the Allwinner T527 octa-core board and the Rockchip RK3568, RK3566, and RK3288 filling the industrial, vision, and POS tiers between them. AndroidSBC ships the whole range from the Wanlin Longgang plant, and Bordeaux buyers can mix platforms inside a single framework agreement rather than opening a new supplier file for each tier.

About AndroidSBC and the Allwinner H618 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, and the WF-Series is its nine-board custom line. Three Allwinner parts cover commercial display, OTT and Android TV, and industrial edge; four Rockchip parts cover 8K video wall, industrial edge, machine vision, and POS; two SOM modules serve carrier-board projects. The Longgang plant in Shenzhen runs its own SMT lines, aging racks, and EMC pre-compliance bench, so the export file is produced where the boards are built. For France importers that removes the usual gap between the factory that makes the board and the party that has to answer for it at customs.

WF-H618 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-H618 (OTT TV Box and Android TV Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For France importers sourcing the WF-Series, the 2GB + 8GB (WF-H618-A) variant is the typical configuration for the OTT TV box and Android TV stick use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing OTT TV Box and Android TV Board for France Buyers

Buyers in Bordeaux who have sourced an ott tv box and android tv board for a few seasons tend to separate two questions: can the factory hold the price, and can it hold the allocation. The second one is harder. The Allwinner H618 is allocated at wafer level, and a 26,315-unit order placed against trader stock is the order most likely to slip a quarter without anyone warning the buyer. The second issue is firmware, not hardware. Vendors promise the full certified software stack and then ship a bare AOSP image, and the failure only surfaces at the warehouse when the unit is powered on against the customer's app.

The third exposure is paperwork. Factories that stamp marks without holding the underlying test reports leave the importer to produce a Technical File after the fact, which is exactly when the container is sitting in a bonded yard. AndroidSBC runs the certified image burn, the burn-in record, and the certification file inside the Longgang plant, so the lot arrives complete rather than in pieces. The nine boards in the WF-Series cover OTT TV box, Android TV stick, streaming media player, hybrid set-top box, hotel IPTV receiver, smart screen, single-board computer, and IoT gateway and each one carries three memory configurations, which keeps Bordeaux and France buyers on standard SKUs for most requirements.

Buyers in France tend to ask about the local mark before they ask about price. In France ANFR radio registration is separate from the CE marking, and buyers normally ask for both before releasing a purchase order. AndroidSBC handles that by preparing the destination-market file covering CE marking with ANFR radio interface registration administered by ANFR alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Le Havre on the Le Havre to Yantian lane.

Competitive Comparison: WF-H618 vs Competing H618 Boards

Competing boards in the ott tv box and android tv board category sort into three camps: cheap legacy SoC boards, mid-range Cortex-A55 boards with certification, and 64-bit boards with real expansion. The WF-H618 is in the last camp, and its edge is Allwinner H618 plus a display path that holds under a continuous loop rather than a bench test.

• vs A133 4K@30fps-only boards: the H618 8K H.265 hardware decode doubles the decoder throughput ceiling.
• vs 1080p-only Cortex-A7 boards: the quad-core 64-bit Cortex-A53 adds AES-128 hardware crypto for Widevine L1.
• vs quad-core Cortex-A55 boards: the Cortex-A53 1.5GHz matches the A55 on burst frequency while keeping better software continuity for legacy SoC boards.
• vs older Mali-450 GPU boards: the Mali-G31 MP2 is two generations newer, with Vulkan 1.1 and OpenGL ES 3.2 support.

Global OTT Set-Top Box and Android TV Market Trends

The OTT Set-Top Box and Android TV curve is what France importers read before committing to an ott tv box and android tv board programme. The number they quote is the Android TV Box segment at USD 12.45 billion in 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035), which serves as the closest public proxy for Android silicon demand. For Bordeaux that resolves into three demand patterns across the WF-Series order book:

• OTT TV box: WF-H618 runs the ATV 12 launcher with the GMS stack pre-burned.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-H618 board carries that headroom without a board change.
• Streaming media player: WF-H618 holds an 8K H.265 loop while the 4K HDMI 2.0 output stays locked at 60fps.

What the OTT Set-Top Box and Android TV data does not show is the operational cost of a supply break, which is why Bordeaux buyers increasingly weight supplier continuity above a marginal price difference.

Across those three segments, Bordeaux procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a retail or hospitality programme needs a twelve-month shipping window.

Partner Success Story: Atlas Gym Networks in Bordeaux, France

Atlas Gym Networks, a fitness chain technology team serving the France market, deployed 2,700 units of the WF-H618 board for in-club digital signage and class screens. The rollout covered the ott tv box, streaming media player, and smart screen workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 2,700 units of the WF-H618 board for in-club digital signage and class screens
• Region: Bordeaux, France
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Shekou with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Le Havre via the Le Havre to Yantian lane

"Class screens and club signage share one image now. The H618 board took the unified content package on first boot and reported back to the CMS within the hour."

- Marco Bellini, IT Infrastructure Lead

Field Report: pre-shipment inspection bench at the Wanlin Longgang test facility, with the WF-H618 board holding an 8K H.265 decode workload for the 26,315-unit order destined for Bordeaux

Reporter Jiang Bo, on the ground in Bordeaux, France. Engineers fed the WF-H618 board a reference stream and watched for throughput drops, dropped frames, and colour banding. Pass criteria required zero dropped frames across the full run plus a glitch-free secondary output for the entire 30-minute window. Nothing on the bench needed a retest.

A spare-parts kit was packed alongside the order so the destination depot could swap a board without waiting on a cross-border shipment.

The inspection confirmed three things on the spot: the WF-H618 units hold the burn-in with a yield above 99.18 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ANFR radio interface registration administered by ANFR, cleared for entry at Port of Le Havre on the Le Havre to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that France importers can hand straight to their customs broker.

Filed by Jiang Bo, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-H618 Application Scenarios

The WF-Series fits nine application lanes, with the WF-H618 (OTT TV Box and Android TV Board) as the lead SKU for Bordeaux and France programmes:

• OTT TV box: WF-H618 runs the ATV 12 launcher with the GMS stack pre-burned.
• Android TV stick: WF-H618 fits the 56x85mm dongle envelope with the IR receiver onboard.
• Streaming media player: WF-H618 holds an 8K H.265 loop while the 4K HDMI 2.0 output stays locked at 60fps.
• Hybrid set-top box: WF-H618 pairs the Gigabit Ethernet port with the USB 2.0 OTG path.
• Hotel IPTV receiver: WF-H618 accepts property-wide APK plus DRM credential push.
• Smart screen: WF-H618 drives the MIPI-DSI panel through the 26-pin expansion header.
• Single board computer: WF-H618 boots Debian, Ubuntu, and Armbian from the same image set.
• IoT gateway: WF-H618 runs the Matter-ready stack on OpenWrt 23.

Partnership Models for Bordeaux Buyers

For Bordeaux distributors and brand owners, AndroidSBC opens the ott tv box and android tv board line under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever structure a France partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-H618 is the 2GB + 8GB (WF-H618-A) configuration at MOQ 5,000 units per shipment, four weeks to sample and six weeks to production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: On the WF-H618, yes: ATV 12 with GMS plus Widevine L1 and Dolby Audio, burned on the Longgang line for every lot. On the remaining eight boards the default image is AOSP or a Linux distribution, because those boards usually sit in commercial display, industrial, or POS deployments where Play Services is not a requirement. AndroidSBC will build a GMS image for ODM customers who ask for it and will state clearly which boards carry which certification.

What is the difference between the nine WF-Series models?

Answer: The line splits by workload. Three Allwinner boards cover cost-sensitive display work (WF-A133), OTT and Android TV (WF-H618), and industrial control with NPU inference (WF-T527). Four Rockchip boards cover 8K video wall and AI computing (WF-RK3588), industrial edge (WF-RK3568), machine vision (WF-RK3566), and POS or signage (WF-RK3288). Two further models are modules rather than motherboards: WF-A133S and WF-RK3588S are SOM parts for customers who bring their own carrier design.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for France?

Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports, the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a France market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.

What are the MOQ and lead time for a first order?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a France partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept platform-mixed purchase orders.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services, custom Linux images on Yocto or Debian or Buildroot, and BSP ports for customer carriers. The engineering desk at Longgang performs the port itself, which matters because an unmodified vendor BSP rarely matches a customer carrier revision.

What about software updates and long-term support?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux tracks. AndroidSBC also runs an OTA service that partners can use to push firmware to deployed units. On POS and industrial programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU, and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton labelling and pallet configuration are set up for FBA inbound requirements, and the export declaration names the Wanlin Longgang source factory as the place of origin.

How does AndroidSBC handle RMA or DOA replacements?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-H618 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-H618 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-Series. Buyers in Bordeaux and France looking to source the WF-H618 straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with ANFR radio interface registration for France, administered by ANFR, entering at Port of Le Havre on the Le Havre to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, certification scope, and Incoterm. Provide those and a per-lot quote plus the WF-Series MOQ matrix comes back within two business days.