In-vehicle Infotainment Board, WF-A133S, AndroidSBC, Bordeaux

TL;DR: In-vehicle Infotainment Board

SHENZHEN, China, September 10, 2026 - The WF-A133S board cleared the Longgang aging bench this week in lot 209, a 28,055-unit run for Bordeaux, France, and moved straight to the container yard.

AndroidSBC shipping and Incoterm briefing for WF-Series board orders serving Bordeaux, France. The WF-Series spans nine boards in one line: WF-A133 on the Allwinner A133 quad-core Cortex-A53 1.5GHz platform with the PowerVR GE8300 GPU, WF-H618 on the Allwinner H618 with 8K H.265 decode, WF-T527 on the Allwinner T527 octa-core Cortex-A55 with a 2 TOPS NPU, and the Rockchip side of the line covering WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, and WF-RK3588S. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the whole line from the Longgang source factory in Shenzhen to Bordeaux and France importers running OTT TV box, Android TV, commercial display, industrial control, edge AI, POS terminal, kiosk, and IoT gateway programmes.

About AndroidSBC and the Allwinner A133 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade building OEM/ODM boards on Allwinner, Rockchip, and Amlogic silicon. The line this release covers is the WF-Series: nine boards that between them span the Allwinner A133, Allwinner H618, Allwinner T527, Rockchip RK3588, Rockchip RK3568, Rockchip RK3566, and Rockchip RK3288 platforms, plus two board-to-board SOM options. Wanlin's Longgang plant in Shenzhen builds the WF-Series for OTT TV box, Android TV, commercial display, industrial control, edge AI, POS, kiosk, and IoT gateway programmes. For France, the practical value of the range is that a single supplier relationship covers several silicon platforms, so a distributor assembling a Bordeaux catalogue does not have to open a new vendor file every time a customer asks for a different performance tier.

WF-A133S Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-A133S (Core Board SOM and Custom Carrier Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For France importers sourcing the WF-Series, the 2GB + 16GB, 200-pin B2B (WF-A133S-A) variant is the typical configuration for the custom carrier board and SOM integration use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Core Board SOM and Custom Carrier Board for France Buyers

Buyers in Bordeaux who have run the core board som and custom carrier board category for a few years tend to stop shopping on price alone. The Allwinner A133 allocation is the real constraint, and it is the reason a 28,055-unit order can look cheap on paper and expensive in a slipped quarter. The software question follows immediately. The hardware spec sheet is easy to verify; the difference between a board that runs a launcher and a board that holds a certified, credential-locked stack only becomes visible after the first field update.

Documentation closes the list. Buyers in Bordeaux have learned to ask for the test reports before the deposit, because a CE mark printed on a carton is worth nothing at the port without the Declaration of Conformity behind it. AndroidSBC moves both risks inside the factory: the certified image is burned at Longgang, the burn-in record is attached per unit barcode, and the Technical File ships with the lot. Across the nine WF-Series boards the coverage runs from custom carrier board design, SOM integration, industrial panel builds, medical device carriers, vending machine control, access control, and bespoke kiosk hardware, with three memory configurations per model, so a Bordeaux buyer can usually match a requirement from standard stock.

Compliance for France is handled at the factory rather than after arrival. In France ANFR radio registration is separate from the CE marking, and buyers normally ask for both before releasing a purchase order. The Longgang export desk builds the destination-market file for CE marking with ANFR radio interface registration administered by ANFR and issues it alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the shipment booked into Port of Le Havre on the Le Havre to Yantian lane.

Competitive Comparison: WF-A133S vs Competing A133 Boards

The comparison set for the core board som and custom carrier board socket splits three ways: legacy SoC boards priced low and uncertified, Cortex-A55 boards that carry certification but cap decode early, and 64-bit boards with both. The WF-A133S sits in the third group, differentiated by Allwinner A133, by display stability under a continuous load, and by the factory-side certified image burn.

• vs fixed-connector motherboards: the WF-A133S SOM breaks every display and serial path out to a carrier, so the enclosure drives the board and not the reverse.
• vs other 22nm SOM modules: the A133 SOM keeps the PowerVR GE8300 GPU and the 4K@30fps decode path on a 45mm square module.
• vs NXP i.MX SOM pricing: the A133 SOM holds a materially lower unit cost for Android-class kiosk workloads.
• vs full custom motherboard projects: the SOM route removes the DDR routing risk and shortens the carrier design cycle to six weeks.

Global Custom SOM and Carrier Board Engineering Market Trends

Order timing in Bordeaux now tracks the Custom SOM and Carrier Board Engineering curve rather than the calendar-year budget. Global Growth Insights sizes the Android TV Box segment at USD 12.45 billion for 2025 with a 30.49 percent CAGR through 2035 (Global Growth Insights, 2025-2035), the Android silicon baseline that France buyers keep on the desk when they negotiate allocation. Three patterns are visible in the WF-Series book:

• Custom carrier board design: WF-A133S plugs the SOM into the customer carrier over the 200-pin B2B connector.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-A133S board carries that headroom without a board change.
• Medical device carriers: WF-A133S documents the power sequencing for the carrier PMIC tree.

For the Custom SOM and Carrier Board Engineering category the practical signal in France is that framework agreements are replacing spot buying, and the agreements are getting longer.

In all three cases, Bordeaux buyers are converting spot quotes into blanket orders with a monthly lot release, because a programme that has to hold a twelve-month shipping window cannot tolerate a mid-year allocation break.

Partner Success Story: StreamTV Distribution in Bordeaux, France

StreamTV Distribution, a consumer electronics distributor serving the France market, deployed 26,000 units of the WF-H618 OTT board into a retail channel with national shelf programmes. The rollout covered the custom carrier board design, medical device carriers, and bespoke kiosk hardware workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 26,000 units of the WF-H618 OTT board into a retail channel with national shelf programmes
• Region: Bordeaux, France
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Nansha with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Le Havre via the Le Havre to Yantian lane

"AndroidSBC delivered 26,000 H618 boards across three monthly lots and every one arrived with the certified stack already burned. Our retail programme went from purchase order to shelf in under ten weeks, which we had not managed with any previous supplier."

- Sarah Chen, VP Sourcing

Field Report: container yard at Yantian, where 28,055 WF-A133S boards from the Wanlin export base are being loaded onto containerised pallets with the customs declaration naming the Longgang source factory

Reporter Li Jian, on the ground in Bordeaux, France. The yard crew handled the order on flat pallets wrapped in anti-static film, with every carton barcode-traced back to the burn-in record. The customs broker attached a single declaration naming the Wanlin Longgang source factory as the place of origin, and the container was sealed before the afternoon cut-off.

A carton-level audit matched 40 sampled serials against the burn-in database with no mismatch.

The inspection confirmed three things on the spot: the WF-A133S units hold the burn-in with a yield above 99.06 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ANFR radio interface registration administered by ANFR, cleared for entry at Port of Le Havre on the Le Havre to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that France importers can hand straight to their customs broker.

Filed by Li Jian, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-A133S Application Scenarios

The WF-Series fits nine application lanes, with the WF-A133S (Core Board SOM and Custom Carrier Board) as the lead SKU for Bordeaux and France programmes:

• Custom carrier board design: WF-A133S plugs the SOM into the customer carrier over the 200-pin B2B connector.
• Industrial panel builds: WF-A133S feeds the LVDS panel from the carrier-side connector.
• Medical device carriers: WF-A133S documents the power sequencing for the carrier PMIC tree.
• Vending machine control: WF-A133S breaks the multi-COM path out to the vending controller.
• Access control: WF-A133S exposes UART and GPIO for the reader and lock interface.
• Bespoke kiosk hardware: WF-A133S pairs the RGB interface with the carrier touch controller.
• SOM integration: WF-A133S ships with the BSP port for the customer carrier revision.
• Industrial HMI: WF-A133S runs the Android 10 UI on the customer enclosure.

Partnership Models for Bordeaux Buyers

For Bordeaux importers and brand owners, the WF-A133S and the rest of the WF-Series are available under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever tier a France partner picks, the goods leave Longgang with one documentation pack covering CE, FCC, UKCA, RoHS, and REACH. The usual first order on the WF-A133S is the 2GB + 16GB, 200-pin B2B (WF-A133S-A) configuration at MOQ 5,000 units, four weeks for samples and six weeks for mass production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: It depends on the platform, and AndroidSBC is explicit about the split. The WF-H618 carries the ATV 12 GMS build with Widevine L1 and Dolby Audio pre-burned at the factory. The WF-A133, WF-T527, and the Rockchip boards ship with an AOSP or Linux image by default, and a GMS build can be prepared for ODM partners who need Play Services in the field. Certification scope is agreed per project rather than assumed.

What is the difference between the nine WF-Series models?

Answer: WF-A133 is the Allwinner A133 commercial display and advertising board. WF-H618 is the Allwinner H618 OTT TV box and Android TV board. WF-T527 is the Allwinner T527 octa-core industrial control and edge AI board. WF-RK3588 is the Rockchip RK3588 8K video wall and AI computing board. WF-RK3568 is the Rockchip RK3568 industrial edge board. WF-RK3566 is the Rockchip RK3566 machine vision and HMI board. WF-RK3288 is the Rockchip RK3288 POS and signage board. WF-A133S is an Allwinner A133 SOM module for custom carrier work. WF-RK3588S is a Rockchip RK3588 SMARC 2.2 module for the same purpose.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for France?

Answer: Yes, and the file travels with the goods rather than behind them. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, and REACH with test reports dated within the prior year. AndroidSBC will also advise on any France-specific addition during quotation, which is the point at which the answer is still useful.

What are the MOQ and lead time for a first order?

Answer: The entry point is 5,000 units per shipment, four weeks for samples and six weeks for production. A twelve-month framework agreement released monthly will bring the per-lot MOQ down, and AndroidSBC will accept a mixed order that draws several WF-Series boards against a single contract.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Yes, under NDA. ODM partners get custom Android ROM work including proprietary services and a custom launcher, Linux builds based on Yocto, Debian, or Buildroot, and BSP ports for custom carrier boards. The SDK and BSP source are released to the partner under the NDA, and AndroidSBC's engineering desk handles the port rather than handing over an unmodified vendor drop.

What about software updates and long-term support?

Answer: Wanlin commits to a minimum seven-year supply window across the WF-Series. Security patches are back-ported across the Android and Linux firmware tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. For POS and industrial programmes, the support commitment is written into the framework agreement rather than left as an understanding.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU, and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-A133S unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit burn-in record means the failure report usually carries a root cause alongside the replacement.

Contact AndroidSBC: Start Your WF-A133S Sourcing Conversation

The AndroidSBC export desk handles all WF-Series enquiries from Bordeaux and France. Direct factory contact for the core board som and custom carrier board is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with ANFR radio interface registration for France, administered by ANFR, entering at Port of Le Havre on the Le Havre to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To start an OEM or ODM review, send the target volume, the certification scope you need, and your preferred Incoterm. The export desk replies with a per-lot quotation and the MOQ matrix across the nine WF-Series boards within two business days.