RK3588 big.LITTLE Custom Motherboard, WF-C3588-P8, AndroidSBC, Bordeaux

TL;DR: RK3588 big.LITTLE Custom Motherboard

LONGGANG, Shenzhen, September 12, 2026 - Wanlin Manufacturing Group confirmed the release of lot 180, a 6,305-unit run of WF-C3588-P8 boards destined for Bordeaux, France, after the lot cleared the burn-in rack and the pre-shipment bench.

AndroidSBC opens the custom RK3588 motherboard platform to overseas OEM buyers and industrial integrators serving Bordeaux, France. The WF-C3588 line is a custom motherboard programme built on the Rockchip RK3588 octa-core platform (4x Cortex-A76 at 2.4GHz plus 4x Cortex-A55 at 1.8GHz on 8nm) with a triple-core NPU delivering 6 TOPS of INT8 inference, 8K H.265 decode and up to 32GB of LPDDR4X or LPDDR5. AndroidSBC, the export arm of Wanlin Manufacturing Group, builds nine custom variants at the Longgang source factory in Shenzhen for Bordeaux and France buyers: WF-C3588-A0 custom Android motherboards, WF-C3588-I1 custom industrial boards, WF-C3588-M2 core boards and SOMs with carrier design, WF-C3588-S3 custom signage and video wall boards, WF-C3588-K4 custom kiosk and POS boards, WF-C3588-R5 custom robotics controllers, WF-C3588-N6 custom NVR boards, WF-C3588-E7 custom edge AI boards, and WF-C3588-P8 custom ARM PC and NAS boards.

About AndroidSBC and the Rockchip RK3588 Board Family

The WF-C3588 is a nine-variant custom motherboard programme from AndroidSBC, the export arm of Wanlin Manufacturing Group in Shenzhen. One Rockchip RK3588 silicon, nine custom categories: custom Android motherboards, custom industrial boards, core board and SOM work, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant handles SMT, burn-in and pre-shipment inspection in one building, and the export desk handles the CE, FCC, UKCA, RoHS and IEC 62368-1 file per lot. For France importers, the line covers the custom board categories a Bordeaux distributor is most often asked to quote.

WF-C3588-P8 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-P8 (Custom ARM PC, Mini PC and NAS Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For France importers sourcing the WF-Series, the 16GB + 256GB (WF-C3588-P8-C) variant is the typical configuration for the custom ARM PC and NAS programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom ARM PC, Mini PC and NAS Board for France Buyers

Buyers in Bordeaux who have run the custom arm pc, mini pc and nas board category for a few years tend to stop shopping on price alone. The Rockchip RK3588 allocation is the real constraint, and it is the reason a 6,305-unit order can look cheap on paper and expensive in a slipped quarter. The software question follows immediately. The hardware spec sheet is easy to verify; the difference between a board that runs a launcher and a board that holds a certified, credential-locked stack only becomes visible after the first field update.

Documentation closes the list. Buyers in Bordeaux have learned to ask for the test reports before the deposit, because a CE mark printed on a carton is worth nothing at the port without the Declaration of Conformity behind it. AndroidSBC moves all three risks inside the factory: the custom variant is assembled at Longgang, the certified image is burned on the same line, and the Technical File ships with the lot. Across the nine WF-C3588 variants the coverage runs from ARM PCs, mini PCs, thin clients, NAS enclosures, media stations, home theatre systems, desktop workstations, and personal cloud devices, with three memory configurations per variant, so a Bordeaux buyer can usually match a requirement from the standard custom range.

Buyers in France tend to ask about the local mark before they ask about price. In France ANFR radio registration is separate from the CE marking, and buyers normally ask for both before releasing a purchase order. AndroidSBC handles that by preparing the destination-market file covering CE marking with ANFR radio interface registration administered by ANFR alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Le Havre on the Le Havre to Yantian lane.

Competitive Comparison: WF-C3588-P8 vs Competing RK3588 Boards

Three families of board chase the same custom arm pc, mini pc and nas board socket. The first is catalogue hardware with fixed memory and fixed I/O, the second is re-badged stock where nobody owns the schematic, and the third is a real custom platform built by the factory that runs the SMT line. The WF-C3588-P8 belongs to the third family and separates itself on Rockchip RK3588, on customization depth from schematic to firmware, and on a certified image burned per lot.

• vs x86 entry desktops: the WF-C3588-P8 runs office and media workloads at a fraction of the power draw, which is the argument for fleet and education deployments.
• vs consumer ARM sticks: dual SATA bays, NVMe and dual GbE make it a real NAS and desktop board rather than a streaming stick.
• vs single-line mini PC brands: the customization path lets a brand keep one platform across a product family while varying memory, storage and chassis.
• vs assembled import boxes: the seven-year supply commitment and the per-lot file give a PC brand a lifecycle story instead of a spot buy.

Global Custom ARM PC and NAS Board Market Trends

Buyers in Bordeaux are reading the Custom ARM PC and NAS Board curve before they commit to a custom arm pc, mini pc and nas board programme. MarketsandMarkets reports the Edge AI hardware segment at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, 2025-2030), used here as the RK3588-class silicon baseline rather than as a number for this category. That baseline breaks into three practical demand patterns for the WF-C3588 in France:

• Fleet desktop programme: an enterprise replaces ageing towers with fanless ARM PCs at a third of the power draw.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-P8 board carries that headroom without a board change.
• Home NAS enclosure: a storage brand ships a dual-bay NAS with the NPU running photo search locally.

For the Custom ARM PC and NAS Board category the practical signal in France is that framework agreements are replacing spot buying, and the agreements are getting longer.

Across those three segments, Bordeaux procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a custom Android, industrial, signage or robotics programme needs a twelve-month shipping window.

Partner Success Story: Northlight Robotics in Bordeaux, France

Northlight Robotics, an AMR and AGV maker serving the France market, deployed 7,800 custom WF-C3588-R5 robotics controller boards for a warehouse fleet rollout. The rollout covered the fleet desktop programme, home nas enclosure, and personal cloud device workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 7,800 custom WF-C3588-R5 robotics controller boards for a warehouse fleet rollout
• Region: Bordeaux, France
• Models used: WF-C3588-P8 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Yantian with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Le Havre via the Le Havre to Yantian lane

"We handed over our sensor list and got back a carrier with the LiDAR serial bank and the motor CAN routed exactly to spec. SLAM runs on the NPU on the same board that drives the wheels, which removed an entire controller from the chassis."

- Park Ji-hoon, Technical Director

Field Report: a Bordeaux hospitality property where 6,305 units of the WF-C3588-P8 board were installed behind guest-room displays during a property-wide IPTV refresh

Reporter Wei Tao, on the ground in Bordeaux, France. The property team pulled every legacy box out of the guest rooms across a two-day window and replaced them with WF-C3588-P8-based units. Once the head-end was live, it pushed a property-wide application build plus the DRM credentials into every room over the in-house network, and the rollout finished a week ahead of the season opening.

A spare-parts kit was packed alongside the order so the destination depot could swap a board without waiting on a cross-border shipment.

The inspection confirmed three things on the spot: the WF-C3588-P8 units hold the burn-in with a yield above 99.06 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ANFR radio interface registration administered by ANFR, cleared for entry at Port of Le Havre on the Le Havre to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that France importers can hand straight to their customs broker.

Filed by Wei Tao, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-P8 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-P8 (Custom ARM PC, Mini PC and NAS Board) as the lead SKU for Bordeaux and France programmes:

• Fleet desktop programme: an enterprise replaces ageing towers with fanless ARM PCs at a third of the power draw.
• Thin client estate: a bank standardises on one board class across branches with a locked Ubuntu image.
• Home NAS enclosure: a storage brand ships a dual-bay NAS with the NPU running photo search locally.
• Media station build: a CE brand pairs the board with an 8K panel and Widevine-level DRM for a premium player.
• Education desktop: a district deploys locked-down student desktops with MDM enrolment out of the box.
• Personal cloud device: a privacy-focused brand runs sync and backup locally with no cloud dependency.
• Trading desktop: a finance team runs four screens from one board with the desktop image tuned for stability.
• Developer workstation: an engineering shop issues Ubuntu workstations with the NPU for local model testing.

Partnership Models for Bordeaux Buyers

For Bordeaux distributors and brand owners, AndroidSBC opens the custom arm pc, mini pc and nas board line under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever structure a France partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-C3588-P8 is the 16GB + 256GB (WF-C3588-P8-C) configuration at MOQ 5,000 units per shipment, 1-3 days to sample and 15-30 days to mass production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: The customization scope runs across five layers: hardware (PCB, PCBA, I/O, memory, storage), thermal (fanless passive, vented, wide-temperature, conformal coating), software (custom ROM, custom Linux, pre-installed apps, OTA), branding (logo, packaging, boot animation, SKU labels), and compliance (the certification file assembled for the exact configuration you ship). Most France partners change two or three layers on a standard variant rather than commissioning a full custom run.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Custom ROM, custom BSP and custom SDK work are all part of the ODM tier. AndroidSBC builds the Android image (12, 13, 14 or 15, GMS or AOSP), ports the Linux BSP to your carrier revision, and releases the SDK modules your team needs under NDA. The engineering desk carries the port itself, so a France integrator is not left debugging an unmodified vendor BSP against a carrier it was never designed for.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. The RK3588 NPU runs INT4, INT8, INT16, FP16, BF16 and TF32, and AndroidSBC supports model deployment through the Rockchip RKNN-Toolkit2, with quantization from PyTorch, ONNX, TensorFlow, Caffe and MXNet. As part of the ODM tier, the engineering desk walks your model from framework to RKNN format and validates it on the actual board configuration you are shipping, not a reference unit. Model files are versioned so a retrained model can be pushed to field units through OTA without a board swap.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: The structure is deliberately two-speed: 1-3 days for a standard-variant sample so a France project team can start immediately, and 15-30 days to mass production on a custom run once the design freezes. MOQ is 5,000 units per shipment on standard variants, with custom and pilot quantities negotiated against the annual volume commitment.

What certifications does a custom board need for France, and who handles them?

Answer: Certification is part of the customization scope, not an afterthought. The in-house file covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with test reports dated inside twelve months, plus GMS and EDLA tracks for custom Android and display products. The file is built for the exact configuration you ship, which matters for a custom board because a test report on a different memory fit is not a valid report at all.

How long will AndroidSBC keep supplying a custom board?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux firmware tracks and OTA infrastructure for pushing firmware and RKNN model updates to deployed units. Long-lifecycle programmes in industrial, signage and robotics usually ask for the term in writing, and it is written.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton labelling and pallet configuration follow FBA inbound requirements, the export declaration names the Wanlin Longgang source factory as the place of origin, and each pallet carries a per-unit barcode that traces back to the burn-in record for downstream RMAs.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-C3588-P8 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in and configuration record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-C3588-P8 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-C3588 custom board line. Buyers in Bordeaux and France looking to source the WF-C3588-P8 straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with ANFR radio interface registration for France, administered by ANFR, entering at Port of Le Havre on the Le Havre to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, customization scope and Incoterm. Provide those and a per-lot quote plus the WF-C3588 MOQ matrix comes back within two business days.