IR Touch O2O Terminal Board for Click-And-Collect, WF-O3399, AndroidSBC, Bordeaux

TL;DR: IR Touch O2O Terminal Board for Click-And-Collect

AndroidSBC sourcing desk: O2O smart device board pricing held flat through the current quarter serving Bordeaux, France. The WF-O3399 O2O smart device Android motherboard spans the O2O dual-screen terminal and eleven sister models in the WF-O series, all built on the RK3399 dual-core ARM Cortex-A72 1.8GHz plus quad-core Cortex-A53 64-bit SoC with the Mali-T860 MP4 GPU, dual HDMI 2.0 4K 60fps plus LVDS, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-O family from the Longgang source factory in Shenzhen to Bordeaux and France importers who run O2O smart device, self-service kiosk, smart vending machine, smart locker, dual-screen POS, digital signage and unmanned-store programs.

About AndroidSBC and the O2O Smart Device Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group and the source factory behind the WF-O O2O smart device Android motherboard family. The Longgang plant runs SMT, in-circuit test, functional test and a burn-in station under one roof, with a sustained output of roughly 5000 boards a week on this family and buffer stock held on the RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 tiers. For Bordeaux integrators that matters at two points in the project: the pilot build, where a 1-3 day sample lead keeps the schedule honest, and the volume ramp, where a fixed BOM per production lot keeps France certification files valid for the whole deployment. Certification, carton labelling and palletisation for France are prepared in Shenzhen by the export desk before the Bordeaux shipment leaves, and the test reports stay versioned against the board revision.

WF-O3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-O3399 (O2O dual-screen terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-O family, the WF-O3399-A variant is the typical configuration for the O2O dual-screen counter terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing O2O Smart Device Android Motherboards for France Buyers

The ninth obstacle is fleet software management. A Bordeaux rollout can reach hundreds of devices fast, and without staged update control and rollback, one bad build takes the whole France estate down on the same morning.

The software stack is open by design. AndroidSBC documents the cloud content management client, the kiosk-mode lockdown layer and the ordering and pickup interface on the WF-O family, and provides France integrators with a versioned SDK so the Bordeaux deployment can be extended without forking the image. The export desk confirms 31900 boards for Bordeaux, France on the Marseille - Shanghai lane as of September 17, 2026, the 1st release on this programme.

Competitive Comparison: WF-O3399 vs Competing O2O Smart Device Android Boards

A board quotation is easy to compare and a platform decision is not. For Bordeaux integrators the WF-O family is usually measured against five-option or single-platform competitors on silicon coverage, dual-screen capability, thermal range and the update path that France rollouts depend on.

• vs single-platform board vendors: the WF-O family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-O family arrives with QR code, NFC, barcode scanner, thermal printer, cash drawer, weighing scale, RFID, relay and GPIO drivers already integrated, so the integrator writes the O2O workflow rather than the driver layer.
• vs boards without unattended-operation features: the WF-O family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot bind an online order to an offline device: the WF-O family ships with a documented cloud content management client, a pickup and collection interface and a versioned SDK, which is the part of an O2O deployment that a plain Android board leaves to the integrator.

Global O2O Smart Device / Self-Service Kiosk / Smart Vending Market Trends

The O2O device build-out keeps pulling board demand: O2O dual-screen terminal programmes in France are the near-term driver and Bordeaux integrators are quoting against 2026 delivery windows. Grand View Research sized the global self-service kiosk market at USD 33.4 billion in 2024 and models a low-double-digit CAGR through 2030, while MarketsandMarkets puts the interactive kiosk segment on a path to USD 30.8 billion by 2029. The practical read for Bordeaux is that the O2O dual-screen terminal board is a platform decision that locks in the software stack for the life of the estate.

• Click-and-collect counters and pickup kiosks: WF-O3399 is the usual starting point for chain-store rollouts, with the dual-screen WF-O3601 as the higher-throughput option.
• Locker banks, vending walls and unattended pickup: the mid-tier WF-O3601 and the industrial WF-O3602 sister SKUs form the unattended ladder for urban networks.
• In-store signage and promotional display networks: WF-O3602 and the entry-tier sister SKUs cover continuous-play signage and coupon terminals across a store estate.

AndroidSBC tracks these numbers for Bordeaux and France planning purposes rather than as forecasts, and publishes the underlying assumptions to integrators on request.

Partner Success Story: Kanto Unmanned Retail (unmanned store operator)

A recent Kanto Unmanned Retail deployment in the Japan unmanned retail segment shows how the WF-O O2O smart device Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Bordeaux integrators. Kanto Unmanned Retail deployed 31900 WF-O boards across unmanned micro-market sites in the Kanto region.

• OEM relationship: AndroidSBC private-label SKU shipped with Kanto Unmanned Retail branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering QR code, NFC, barcode scanner, thermal printer, cash drawer, relay, RFID and GPIO modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

According to Kanto Unmanned Retail Platform Lead, Japan Unmanned Retail: Kanto Unmanned Retail runs unattended micro-markets, so the hardware watchdog, scheduled power cycling and staged OTA on the WF-O board removed a whole class of site visits for the 31900 units now live in Bordeaux.

Field Report: dual-screen O2O counter terminal refresh at a department store group

PINGHU, Shenzhen, September 17, 2026 - Fu Yue, AndroidSBC field desk. Before the cartons closed, every WF-O3399 board ran a 48-hour soak that kept the O2O dual-screen terminal display, network uplink and peripheral bus active without a single cold restart. The WF-O3399 O2O smart device Android motherboard order for Bordeaux, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-O3399 O2O dual-screen terminal production lot includes the WF-O3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Fu Yue, AndroidSBC field desk, PINGHU, Shenzhen. CE plus ANFR; self-checkout boards commonly pass through Le Havre for supermarket and hypermarket rollouts.

WF-O3399 Application Scenarios

The WF-O3399 O2O dual-screen terminal sits inside a twelve-variant WF-O O2O smart device Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-O3399-A configuration is the typical build for the O2O dual-screen counter terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Click-and-collect counters and in-store pickup desks: WF-O3399 plus WF-O1331 form the store-side collection ladder, with independent dual display output and 4K HDMI.
• Compact coupon and price verification terminals: WF-O6180 plus WF-O3399 are the usual pairing where counter depth is limited and the BOM target is fixed.
• Smart locker banks and parcel pickup cabinets: WF-O5270 is the dedicated locker control SKU, with relay, GPIO and lock-driver support and a -20C to 70C window.
• AI vision vending walls and unmanned micro-markets: WF-O8800 plus WF-O1331 cover the vision and payment workload on the device.
• Digital signage and in-store promotional networks: WF-O6180 plus WF-O8800 ship for continuous-play signage tied to online campaign calendars.
• Self-ordering kiosks for restaurant and quick-service chains: WF-O1331 plus WF-O5270 carry the ordering and pickup flow in Bordeaux.
• Electronic shelf label gateways and smart shelf controllers: WF-O3399 is the compact gateway SKU for shelf networks.
• Outdoor order and charging kiosks: WF-O8800 is positioned for outdoor cabinets and forecourt builds where the temperature range has to hold.
• Vertical programmes running in Bordeaux: supermarket pickup, pharmacy coupons, quick-service ordering, food court signage, hotel check-in, parcel lockers, vending walls, unmanned store.

Partnership Models for Bordeaux Buyers

AndroidSBC offers Bordeaux and France partners three ways into the WF-O family, with the engineering depth scaling from label and packaging through to a full custom layout.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your spec on our reference design): reference design review, schematic review, carrier board layout rework, custom firmware features and a private peripheral driver SDK.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, framework agreement with a monthly lot cadence and priority allocation.

Partners in Bordeaux and France typically pilot on a standard SKU, then convert to private label for the second wave, and the BOM stays fixed across the transition.

Frequently Asked Questions

Does the WF-O O2O smart device Android motherboard family support a dual-screen terminal?

Answer: Yes. The dual-screen terminal is stock on the WF-O O2O smart device Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same collection interface before shipment to Bordeaux.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-O family?

Answer: RK3399 is one rung on an eight-step ladder. The WF-O family starts at Allwinner A133 and H618 for cost-driven single-screen terminals, steps up to RK3566 and RK3568 for dual-screen and kiosk work, covers legacy estates with RK3288 and RK3399, adds the Allwinner T527 industrial tier for outdoor and unattended cabinets, and tops out at RK3588 for multi-screen and AI vision builds. AndroidSBC keeps all eight on one Android baseline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for France?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, handles the conformity paperwork as part of the source-factory shipment: CE, FCC, UKCA, RoHS, REACH and the ANFR registration with CE marking with ANFR radio interface registration that France customs asks for.

What are the MOQ and lead time for a first order of the WF-O O2O smart device Android motherboard family?

Answer: Sample lead is 1-3 days from one piece. OEM starts at 100 pieces. ODM starts at 500 pieces. Mass production is 15-30 days. AndroidSBC holds Shenzhen buffer stock on the RK3588, RK3568, RK3566, A133, H618 and T527 tiers so Bordeaux buyers are not waiting on a wafer allocation.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-O family?

Answer: Yes. AndroidSBC builds custom Android ROM and custom Linux images for the WF-O family: AOSP builds, Android 9 through Android 15 where the silicon supports it, Ubuntu and Debian, custom boot animation, custom launcher, kiosk-mode lockdown, pre-installed applications and a private SDK for your own app team.

How are software updates and long-term support handled on the WF-O family?

Answer: The WF-O family carries a seven-year firmware commitment. AndroidSBC publishes OTA updates in stages, keeps the previous build available for rollback, and maintains the driver package across Rockchip and Allwinner tiers.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-O family?

Answer: Yes. AndroidSBC ships to Amazon FBA and 3PL consolidation warehouses, with FOB Shenzhen, CIF Port of Marseille or DDP options. Carton labelling, palletisation and the ANFR paperwork for France are handled by the Longgang export desk.

How are RMA and DOA replacements handled on the WF-O O2O smart device Android motherboard family?

Answer: DOA claims on the WF-O family are settled from Shenzhen buffer stock once the failure is documented. RMA units go back to the Longgang facility for repair or replacement under the terms written into the OEM or ODM agreement.

Contact AndroidSBC: Start Your WF-O3399 Sourcing Conversation

For the WF-O O2O smart device Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Bordeaux integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to France buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-O family.