PCAP Touch Government Motherboard for Citizen Self-Service, WF-S3399, AndroidSBC, Bordeaux

TL;DR: PCAP Touch Government Motherboard for Citizen Self-Service

AndroidSBC sourcing desk: government self-service board pricing held flat through the current quarter serving Bordeaux, France. The WF-S3399 government service kiosk Android motherboard spans the dual-screen high definition service terminal and eleven sister models in the WF-S series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, dual 4K output, HDMI plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-S family from the Longgang source factory in Shenzhen to Bordeaux and France importers who run citizen service hall, tax and social security counter, certificate printing, identity verification, public information display and outdoor smart city programmes.

About AndroidSBC and the Government Service Kiosk Android Motherboard Family

The WF-S family exists because public sector procurement rarely buys one board. A citizen service hall needs an enquiry screen, a payment point, a certificate printer and an identity verification terminal, and those four jobs do not want the same silicon. AndroidSBC puts eight Rockchip and Allwinner platforms under one Android baseline so a Bordeaux integrator can mix tiers inside one France tender. Certification, carton labelling and palletisation for France are prepared in Shenzhen by the export desk before the Bordeaux shipment leaves, and the test reports stay versioned against the board revision.

WF-S3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-S3399 (dual-screen high definition service terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-S family, the WF-S3399-A variant is the typical configuration for the high resolution citizen information terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Government Service Kiosk Android Motherboards for France Buyers

The practical failure mode in France estates is the unattended restart. A terminal that needs a staff member to walk over and power it after an outage has not solved the problem the kiosk was bought to solve.

For identity work AndroidSBC wires the trust chain at board level: secure boot, a trusted execution environment, hardware-backed key storage and an audit log that survives a power cycle, which is what a France acceptance test asks to see. The export desk confirms 31900 boards for Bordeaux, France on the Marseille - Shanghai lane as of September 20, 2026, the 1st release on this programme.

Competitive Comparison: WF-S3399 vs Competing Government Service Kiosk Android Boards

A Bordeaux buyer comparing boards is really comparing risk. The silicon is a known quantity; the unknowns are the driver set, the revision discipline, the conformity paperwork and the support window, and those four separate a source factory from a trading desk.

• vs single-platform board vendors: the WF-S family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-S family arrives with capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay drivers already integrated, so the {city} integrator writes the citizen service application rather than the driver layer.
• vs boards without unattended-operation features: the WF-S family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-S family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a citizen screen plus an operator screen and a mirrored duplicate.

Global Government Self-Service / Citizen Service / Public Information Terminal Market Trends

Public sector estates keep pulling board demand: dual-screen high definition service terminal programmes in France are the near-term driver, and the public-sector self-service kiosk market is tracked at about USD 2.05 billion in 2025 against USD 3.95 billion by 2032, a 9.8 percent compound annual rate.

• Citizen service halls and municipal counters: WF-S3399 is the usual starting point for hall rollouts, with the dual-screen WF-S3601 as the citizen plus operator option.
• Tax, social security and housing fund terminals: the mid-tier WF-S3601 and the printing-capable WF-S3602 sister SKUs form the counter ladder, with certificate printing and queue management.
• Outdoor and 24-hour unattended cabinets: WF-S3602 and the industrial sister SKUs cover continuous-operation municipal self-service points across a city estate.

Two numbers decide a France government kiosk programme: how many terminals a hall actually needs, and how many years the estate has to be supported. AndroidSBC plans the WF-S family against both and shares the model with Bordeaux integrators on request.

Partner Success Story: Kanto Public Service Systems (municipal terminal integrator)

A recent Kanto Public Service Systems deployment in the Japan government segment shows how the WF-S government service kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Bordeaux integrators. Kanto Public Service Systems installed 31900 WF-S service boards across ward offices, residence registration counters and certificate issuing points.

• OEM relationship: AndroidSBC private-label SKU shipped with Kanto Public Service Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

According to Kanto Public Service Systems Platform Lead for Japan Government: Kanto Public Service Systems runs unattended certificate issuing points, so the hardware watchdog, scheduled power cycling and staged OTA on the WF-S board removed a whole class of site visits for the 31900 terminals now live in Bordeaux.

Field Report: dual-screen information terminal rollout at a public security service hall

PINGHU, Shenzhen, September 20, 2026 - Gu Wei, AndroidSBC field desk. Technicians at the Longgang line re-ran the ID card reader and thermal printer handshakes on every WF-S3399 board in the lot, because those two peripherals are where a France rollout tends to stall. The WF-S3399 government service kiosk Android motherboard order for Bordeaux, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-S3399 dual-screen high definition service terminal production lot includes the WF-S3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Gu Wei, AndroidSBC field desk, PINGHU, Shenzhen. CE plus ANFR; government service boards commonly pass through Le Havre for prefecture and municipal rollouts.

WF-S3399 Application Scenarios

The WF-S3399 dual-screen high definition service terminal sits inside a twelve-variant WF-S government service kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-S3399-A configuration is the typical build for the high resolution citizen information terminal use case, with identity peripheral driver SDK and staged OTA management bundled.

• Citizen service hall enquiry and queue points: WF-S3399 plus WF-S1331 form the hall entry ladder, with independent dual display output and 4K HDMI.
• Tax, social security and housing fund counters: WF-S1331 plus WF-S6180 are the usual pairing where certificate printing and ID verification run on the same board.
• Immigration and public security checkpoints: WF-S6180 is the dedicated secure identity SKU, with secure boot, trusted execution and an audit trail that survives a power cycle.
• AI identity verification and face recognition terminals: WF-S5270 plus WF-S8800 cover the vision and verification workload on the device.
• Community and neighbourhood service desks: the compact WF-S3399 and the entry-tier sister SKUs serve walk-in enquiry where counter space is limited.
• Outdoor and semi-outdoor municipal cabinets: the industrial T527 sister SKU takes the 24-hour unattended points that see a full seasonal temperature range in Bordeaux.
• Hall notice and announcement networks: the H618 and A133 sister SKUs drive continuous-play public information screens across a Bordeaux building estate.
• Document scanning and form filling terminals: WF-S8800 plus WF-S1331 pair the scanner and the signature pad on one board for the Bordeaux administration.
• Legacy estate refresh programmes: the RK3288 and RK3399 sister SKUs match the mechanical and electrical footprint of existing Bordeaux hall terminals, so a refresh does not become a redesign.

Partnership Models for Bordeaux Buyers

AndroidSBC publishes the three tracks it runs for Bordeaux and France because public sector procurement usually dictates which one applies before the technical discussion starts.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

For France partners the decision is commercial, not technical: the same WF-S board ships on all three tracks, and the difference is how much of it carries the partner brand in Bordeaux.

Frequently Asked Questions

Does the WF-S government service kiosk Android motherboard family support a dual-screen high definition service terminal?

Answer: Yes. AndroidSBC treats the dual-screen high definition service terminal as a stock case on the WF-S family and validates it on every tier that could plausibly run it, including the entry and industrial parts.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-S family?

Answer: AndroidSBC positions the RK3399 inside a ladder rather than as a flagship, because a France estate almost always contains several job types and buying one tier for all of them wastes budget or under-specifies the identity counters.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for France?

Answer: Yes. AndroidSBC supplies CE marking with ANFR radio interface registration documentation for France and bundles the ANFR conformity file into the shipment, which is what a Bordeaux tender acceptance usually asks to see.

What are the MOQ and lead time for a first order of the WF-S government service kiosk Android motherboard family?

Answer: Sample orders from one piece, OEM from 100 pieces, ODM from 500 pieces, and a 15-30 day mass-production window once the France BOM is signed off. AndroidSBC publishes all four numbers to Bordeaux buyers up front.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-S family?

Answer: Yes. AndroidSBC develops custom Android ROM, custom Linux BSP, AOSP builds and kiosk-mode images for the WF-S family, including boot animation, pre-installed applications and a custom UI for Bordeaux and France.

How are software updates and long-term support handled on the WF-S family?

Answer: Updates reach Bordeaux estates through a staged channel with rollback. AndroidSBC publishes the revision, the France integrator validates it against the identity peripherals, then releases it on their own schedule.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-S family?

Answer: Yes. AndroidSBC ships to Amazon FBA and to 3PL consolidation warehouses, with carton labelling, palletisation and export documentation prepared in Shenzhen for Bordeaux and France destinations.

How are RMA and DOA replacements handled on the WF-S government service kiosk Android motherboard family?

Answer: DOA replacement ships with the next consignment, and RMA cases are processed against the lot record AndroidSBC maintains for Bordeaux and France, including the burn-in and peripheral test logs.

Contact AndroidSBC: Start Your WF-S3399 Sourcing Conversation

For the WF-S government service kiosk Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Bordeaux integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to France buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-S family.