Millisecond Face Recognition Board, WF-P3399, AndroidSBC, Bordeaux

TL;DR: Millisecond Face Recognition Board

AndroidSBC field desk: POS rollout map updated across supermarkets, restaurants, hotels and fuel forecourts serving Bordeaux, France. The WF-P3399 POS Android motherboard spans the dual-screen high definition POS with 4K promotion wall and eleven sister models in the WF-P series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, HDMI 2.0 plus eDP output at 4K@60Hz, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Bordeaux and France importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

The WF-P family from AndroidSBC, a Wanlin Manufacturing Group export brand, covers eight silicon tiers from the Rockchip RK3576 octa-core platform down to the Allwinner A133 entry tier. For Bordeaux buyers the practical consequence is simple: one driver contract, one mounting pattern and one firmware baseline across every lane of a rollout, whether the lane is a supermarket checkout, a restaurant counter or an unattended forecourt cabinet. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for France, bundled with the lot so the importer clears customs without a second round of test reports.

WF-P3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-P family, the WF-P3399-A variant is the typical configuration for the flagship store checkout plus media wall use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for France Buyers

Dual-screen POS is where most competing boards fail quietly. They list two display interfaces, but the second lane is a mirror rather than an independent framebuffer, so the customer display cannot carry a separate promotion loop.

For payment certification AndroidSBC supplies the evidence pack rather than an opinion: the board-level security description, the trusted execution description where the tier supports it, and the ANFR route applied in France as a documented path the Bordeaux acquirer can audit. AndroidSBC logged the 1st shipment to Bordeaux on September 23, 2026 - 159100 boards on the Marseille - Shanghai lane, each serialised against its burn-in record and each carrying the same firmware baseline.

Competitive Comparison: WF-P3399 vs Competing POS Android Boards

The WF-P family was specified against the failure modes Bordeaux chains reported on previous rollouts, which is why the comparison reads the way it does.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

The France picture follows the global pattern: cashless adoption sets the demand, and the replacement of legacy registers sets the volume. A Bordeaux integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.

• Entry counter tier: WF-P3399 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P7601 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P7602 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

The eight-tier WF-P line exists because Bordeaux rollouts are not uniform. One chain will use four of the twelve models, and the point is that all four share one driver contract.

Partner Success Story: Kanto Shokai Systems (convenience store POS integrator)

The Kanto Shokai Systems rollout in the Japanese convenience segment shows how the WF-P family from AndroidSBC supports Bordeaux integrators. Kanto Shokai Systems installed 159100 WF-P boards across 118 convenience counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Kanto Shokai Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Kanto Shokai Systems Platform Manager for Japanese Convenience: Kanto Shokai Systems qualified the WF-P board on Japanese receipt typography and standby power, and 159100 units went into the Bordeaux store network in the first release.

Field Report: flagship store checkout and media wall installation

NANSHAN, September 23, 2026 - Jin Tao, AndroidSBC field desk. The WF-P3399 board designated for the dual-screen high definition POS with 4K promotion wall application was pulled from the same production lot as the pilot batch, so the France team received an identical configuration. The WF-P3399 POS Android motherboard order for Bordeaux, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-P3399 dual-screen high definition POS with 4K promotion wall production lot includes the WF-P3399-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Jin Tao, AndroidSBC field desk, NANSHAN. French chains ask for the NF525 fiscal certification trail and French receipt wording, and they audit the log retention behaviour during the pilot.

WF-P3399 Application Scenarios

The WF-P3399 dual-screen high definition POS with 4K promotion wall sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3399-A configuration is the typical build for the flagship store checkout plus media wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3399 drives the cashier screen while the second lane carries the customer display or the promotion wall in Bordeaux.
• Convenience and small format stores: the WF-P3600 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3601 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P3602 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P3566 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Bordeaux: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Bordeaux Buyers

AndroidSBC does not force a track on France partners. The three below are the ones that actually get used.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

All three tracks give Bordeaux partners the same thing underneath: a factory-built board, a frozen BOM and a firmware window measured in years rather than months.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a dual-screen high definition POS with 4K promotion wall?

Answer: Yes - dual-screen high definition POS with 4K promotion wall is supported across the WF-P line, and the Bordeaux configuration is locked as the reference for later lots so re-orders behave identically.

Which silicon tiers are available in the WF-P family for France buyers?

Answer: Eight silicon tiers are offered, and the RK3399 platform sits in the middle of the range. Each tier carries the same peripheral interface contract, so a Bordeaux partner can move between them without re-writing drivers.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: It can. The WF-P family is specified so one board carries the full counter harness: printer, scanner, drawer, customer display and payment reader, with no expansion card required.

What is the minimum order quantity and the sample lead time for France?

Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. The engineering desk handles custom ROM, boot branding, pre-installed apps, BSP porting and SDK modules, and the Bordeaux partner keeps the same image across re-orders.

How are firmware updates delivered to a France estate after deployment?

Answer: The OTA channel is staged and reversible. A Bordeaux chain pushes to a pilot group first, and if a printer or drawer regression appears the image rolls back to the previous build.

What shipping terms does AndroidSBC support for France orders?

Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Bordeaux partner picks the term and AndroidSBC books the lane.

What happens if a board fails in the field in France?

Answer: Failures are handled against the serialised test record. AndroidSBC traces the unit to its lot, confirms the BOM, and ships a replacement from the Bordeaux call-off stock or the next production slot.

Contact AndroidSBC: Start Your WF-P3399 Sourcing Conversation

To start a WF-P POS Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Bordeaux integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to France buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-P family.