1GB LPDDR4 Android Board for Shopfront Screen, WF-X9-05, AndroidSBC, Bordeaux

TL;DR: 1GB LPDDR4 Android Board for Shopfront Screen

AndroidSBC interface desk: LVDS, MIPI, dual serial and four-port USB driver package declared production-ready serving Bordeaux, France. The WF-X9-05 X9 Android motherboard spans the infrared touch all-in-one for interactive kiosks and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with 10-point infrared touch, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Bordeaux and France importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

The X9 family from AndroidSBC, a Wanlin Manufacturing Group export brand, is a single-silicon commercial display board line: all twelve configurations share the Allwinner A133 SoC, the PowerVR GE8300 GPU and one Android 10 build. For Bordeaux buyers the practical consequence is that a pilot batch qualified on one configuration behaves the same way on the next, whether the panel is LVDS or MIPI. The AndroidSBC engineering desk keeps one reference image for the whole X9 line, so a France partner developing against the board is testing against the same Android 10 build that ships in volume, not a one-off sample image.

WF-X9-05 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the X9 family, the WF-X9-05-A variant is the typical configuration for the interactive kiosk rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for France Buyers

Serial wiring is where most competing boards fail quietly. They list two serial ports, but the level is fixed, so the RS232 printer works and the TTL lock board does not, and the Bordeaux integrator ends up adding a converter board that was never in the budget.

For backlight power AndroidSBC supplies the arithmetic rather than an opinion: the 3.3V 800mA, 5V 2A and 12V 2A peripheral budgets are documented per lane, and the ANFR route applied in France is issued against the factory, not against a reseller. The Bordeaux frame agreement converted to a firm order on September 24, 2026 - 54800 boards, Marseille - Shanghai lane, one bill of materials, one firmware baseline, and the France compliance pack bundled.

Competitive Comparison: WF-X9-05 vs Competing Commercial Display Android Boards

The comparison below is the one Bordeaux buyers run when they shortlist three Chinese factories, and it is where the X9 family separates from the field.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Bordeaux integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Bordeaux usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Bordeaux integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Bordeaux.

Global Digital Signage and Commercial Display Market Trends

Connectivity is entering the brief for unglamorous reasons. Remote proof-of-play reporting, scheduled content and remote recovery all need a network path and a clean update channel on the board, and the infrared touch all-in-one for interactive kiosks tier carries those rather than pushing the load onto a separate box.

• Entry playback tier: WF-X9-05 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-12 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-01 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

Growth in France is concentrated in the formats the X9 family was built for: retail media, transport hubs, quick service screens, parcel lockers and unattended self-service.

Partner Success Story: Kanto Shoukai Systems (convenience and station screen integrator)

A Kanto Shoukai Systems deployment in the Japanese convenience and transit segment illustrates how the X9 Android motherboard family supports Bordeaux integrators. Kanto Shoukai Systems installed 54800 X9 boards across 118 convenience and station screens.

• OEM relationship: AndroidSBC private-label SKU shipped with Kanto Shoukai Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Kanto Shoukai Systems Platform Manager for Japanese Convenience and Transit: Kanto Shoukai Systems qualified the X9 board on Japanese typography and standby power, and 54800 units went into the Bordeaux store network in the first release.

Field Report: interactive kiosk rollout at a municipal service point

LONGGANG, September 24, 2026 - Bei Chen, AndroidSBC field desk. The WF-X9-05 board designated for the infrared touch all-in-one for interactive kiosks application was pulled from the same production lot as the pilot batch, so the France team received an identical configuration. The WF-X9-05 X9 Android motherboard order for Bordeaux, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-X9-05 infrared touch all-in-one for interactive kiosks production lot includes the WF-X9-05-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Bei Chen, AndroidSBC field desk, LONGGANG. French retail media buyers ask for French typography and check the standby power figure against the building energy disclosure rules.

WF-X9-05 Application Scenarios

The WF-X9-05 infrared touch all-in-one for interactive kiosks sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-05-A configuration is the typical build for the interactive kiosk rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-05 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-06 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-07 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-08 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-09 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Bordeaux: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Bordeaux Buyers

Three tracks exist because Bordeaux partners arrive from three directions: as a distributor with stock, as an integrator with a customer, or as a brand owner with a label.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

For Bordeaux buyers the practical difference between the tracks is who holds the stock and whose name is on the carton, not what is inside the carton.

Frequently Asked Questions

Does the X9 Android motherboard family support an infrared touch all-in-one for interactive kiosks?

Answer: Yes - infrared touch all-in-one for interactive kiosks is supported across the X9 line, and the Bordeaux configuration is locked as the reference for later lots so re-orders behave identically.

Which configurations are available in the X9 family for France buyers?

Answer: Twelve configurations are offered and they all share one Android 10 image, so a Bordeaux partner can move between them without re-writing the application or re-qualifying the publishing software.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: It can. The X9 family is specified so one board carries the full site harness: panel, touch, printer, scanner and card reader, with no expansion card required.

What is the minimum order quantity and the sample lead time for France?

Answer: One board is enough to start: samples leave Longgang in 1-3 days. Volume orders run 15-30 days, and the Bordeaux partner can call off against a frame agreement rather than ordering in one block.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. The engineering desk handles custom ROM, boot branding, pre-installed apps, BSP porting and SDK modules, and the Bordeaux partner keeps the same image across re-orders.

How are firmware updates delivered to a France screen estate after deployment?

Answer: The OTA channel is staged and reversible. A Bordeaux network pushes to a pilot group first, and if a panel or touch regression appears the image rolls back to the previous build.

What shipping terms does AndroidSBC support for France orders?

Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the Bordeaux partner receives tracking with the lot.

What happens if a board fails in the field in France?

Answer: Failures are handled against the serialised test record. AndroidSBC traces the unit to its lot, confirms the bill of materials, and ships a replacement from the Bordeaux call-off stock or the next production slot.

Contact AndroidSBC: Start Your WF-X9-05 Sourcing Conversation

To start an X9 Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Bordeaux integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to France buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the X9 family.