Multi-Touch Payment Terminal Motherboard with PIN Pad, WF-SPT-01, AndroidSBC, Bordeaux

TL;DR: Multi-Touch Payment Terminal Motherboard with PIN Pad

AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving Bordeaux, France. The WF-SPT-01 smart payment terminal Android motherboard covers the entry countertop payment terminal build for retail checkout and eleven sister configurations in the WF-SPT series, spanning the RK3568 quad-core ARM Cortex-A55 2.0GHz SoC with the ARM Mali-G52 2EE GPU, 5.5-inch 720x1280 MIPI DSI capacitive touch panel, and Android 12 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Bordeaux and France importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

The WF-SPT line exists because payment hardware buyers in France rarely want a new board design - they want the same board with a different modem, a different panel and a different certification file. AndroidSBC holds those variables inside one family, and the Bordeaux buyer picks the configuration rather than commissioning a new PCB. Every configuration ships with the same Android build, the same peripheral contract and the same test report format, so a Bordeaux quality team that has signed off one WF-SPT board can read the next one without a new learning curve.

WF-SPT-01 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-01 (entry countertop payment terminal build for retail checkout) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the WF-SPT family, the WF-SPT-01-A variant is the typical configuration for the convenience store counter checkout use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for France Buyers

Unattended formats change the failure model completely. A counter in Bordeaux has a human to reboot a terminal; a vending machine, a charging pillar or a parking machine does not, so the watchdog, the scheduled power cycle and the offline transaction buffer stop being optional.

Key handling is the fifth problem. Payment hardware shipped into France has to show how keys are injected, how the secure element is provisioned and how a tamper event is logged, and that documentation belongs in the Bordeaux delivery file. AndroidSBC holds the 62800 board sample lot, the production slot and the compliance file on one schedule for Bordeaux, so the 1st release of the quarter is a shipment rather than a negotiation.

Competitive Comparison: WF-SPT-01 vs Competing Smart Payment Terminal Motherboards

AndroidSBC publishes this comparison because Bordeaux integrators ask for it: what changes when a payment terminal board is built by a source factory that holds its bill of materials, against one that is re-spun on every order.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a Bordeaux buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the France integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Bordeaux is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

What France buyers are actually procuring is not a terminal, it is a platform they can repeat across formats. That is why the entry countertop payment terminal build for retail checkout is specified with a peripheral contract rather than a feature list.

• Countertop tier: WF-SPT-07 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-04 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

What the Bordeaux buyer should take from the numbers is a procurement rule: specify the peripheral contract and the firmware window first, then negotiate the unit price, because the integration labour is the larger line item in France.

Partner Success Story: Kanto Retail Engineering (convenience retail integrator)

Kanto Retail Engineering had been buying boards on spot terms before moving to AndroidSBC, and the Japan convenience retail estate was carrying three different firmware baselines as a result. Kanto Retail Engineering installed 62800 WF-SPT boards across 158 convenience stores.

• OEM relationship: AndroidSBC private-label SKU shipped with Kanto Retail Engineering branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

Kanto Retail Engineering Quality Manager for Japan Convenience Retail puts it plainly: "Kanto Retail Engineering accepted the smart payment terminal board after the test report format was agreed, and 62800 units moved into the Bordeaux convenience estate on schedule."

Field Report: countertop terminal rollout at a regional convenience chain

YANTIAN, September 30, 2026 - Lin Yao, AndroidSBC field desk. The WF-SPT-01 entry countertop payment terminal build for retail checkout lot for France finished its burn-in run with the printer, the reader and the scan engine attached rather than on a bare bench, which is the only way the current draw numbers mean anything. The WF-SPT-01 payment terminal board order for Bordeaux, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-SPT-01 entry countertop payment terminal build for retail checkout production lot includes the WF-SPT-01-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Lin Yao, AndroidSBC field desk, YANTIAN. French retail groups specify the receipt layout early, because the printer control header has to match the fiscal wording used at the till.

WF-SPT-01 Application Scenarios

The WF-SPT-01 entry countertop payment terminal build for retail checkout sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-01-A configuration is the typical build for the convenience store counter checkout use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-01 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-11 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-06 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Bordeaux Buyers

AndroidSBC publishes these three tracks because France partners ask the same question in every first call: how much of the work do we take, and how much do you take.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

The France partner that starts on the distribution track and moves to private label does not re-qualify the board, which is the point of holding one peripheral contract across the family.

Frequently Asked Questions

Does the smart payment terminal board family support an entry countertop payment terminal build for retail checkout?

Answer: Yes. The entry countertop payment terminal build for retail checkout is one of the twelve held configurations, which means the bill of materials is frozen for the length of the agreement rather than re-spun between lots in Bordeaux.

Which configurations are available in the WF-SPT family for France buyers?

Answer: AndroidSBC ships twelve configurations including the RK3568 board: value desktop, 4G unattended, face recognition, dual-screen, kiosk, legacy Android 11, portable 4G, outdoor, hospitality, multimedia and legacy Linux builds.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. AndroidSBC validates the panel, the printer and the scan engine together rather than separately, because the combined current draw is what decides whether a terminal survives a shift in France.

What payment scheme certification support does AndroidSBC provide for France?

Answer: AndroidSBC prepares CE marking with ANFR radio interface registration documentation and ANFR conformity files alongside the production order, so the Bordeaux acquiring partner receives a file that names the parts on the pallet.

What is the minimum order quantity and the sample lead time for France?

Answer: MOQ depends on the track: stock configurations ship from one unit, private-label builds start at 500 boards, and both are quoted against the same frozen bill of materials for France.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Boot logo, custom launcher, kiosk mode and pre-installed applications are all available, delivered as a signed image with a staged OTA plan for the Bordeaux estate.

How are firmware updates delivered to a France device estate after deployment?

Answer: Updates are signed, staged and reversible. The Bordeaux integrator chooses the group size, and a failed update returns the terminal to the previous image without a site visit.

What shipping terms does AndroidSBC support for France orders?

Answer: The France lane runs weekly into Port of Marseille, and the Bordeaux buyer receives the tracking reference, the packing list and the compliance file at the same time.

Contact AndroidSBC: Start Your WF-SPT-01 Sourcing Conversation

AndroidSBC is taking new France partner conversations for the WF-SPT family now. Send the format, the volume and the certification calendar and the engineering team returns a configuration proposal.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Bordeaux and France buyers the offer is a source-factory relationship: twelve configurations, one peripheral contract, a frozen bill of materials and a compliance file that ships with the pallet rather than after it.